Welcome To - Shenzhen Jin Jian Da Construction Co., Ltd!

891339018@qq.com

18719060906

You are here: Home > Range of application > Foam concrete buildings pit filled

Range of application

Shenzhen Jin Jianda Construction Co., Ltd. Contact: Mr. Zeng Tel: 18719060906
E-mail: 891339018@qq.com
Address: Bao'an District of Shenzhen City manhole streets New Town Plaza, Building A, Room 1508

Wall filled with foaming concrete
Wall filled with foaming concrete

Shenzhen foam concrete the basic raw materials for cement, lime, water, bubble, adding some filler on this basis, aggregate and additives. Commonly used fillers and aggregate: sand, fly ash, ceramic, stone chip, expanded polystyrene, perlite, solvent grams of fine aggregate, commonly used additives, like concrete, superplasticizer, waterproof agents, retardants, accelerator, etc. Production methods foam concrete the wet mortar method and two dry mortar. Wet mortar is usually in the concrete mixing station will cement, sand and water, mixing mortar, and auto-mixer truck transported it to the site, individually made of foam, then will join sand

Shenzhen bubble concrete of basic raw materials for cement, and lime, and water, and bubble, this based Shang mixed added some filler, and aggregate and the plus agent. common of filler and the aggregate for: sand, and fly ash, and pottery grain, and gravel chip, and expansion polystyrene, and expansion Pearl rock, and benzene off grams fine aggregate, common of plus agent and General concrete as, for reduction agent, and waterproof agent, and sustained gel agent, and promoting gel agent,.
Production methods foam concrete the wet mortar method and two dry mortar.
Wet mortar is usually in the concrete mixing station will cement, sand and water, mixing mortar, and auto-mixer truck transported it to the site, individually made of foam, then will join the mortar, Blender will bubble and mortar mix, and then inject the prepared foam concrete pump or directly on site.
Dry mortar is the dry components (cement, fly ash, and so on) through bulk transportation or transmission system to the construction site, mix dry components with water at the construction site, individually made of foam, and then will join the mortar, both of emulsifier in the mix and used for construction.
Effect bubble concrete pulp body bubble stability of the factors in the, sent bubble agent is effect bubble concrete pouring stability of first factors. because, in bubble concrete material pulp in the, bubble of added volume is big, General quite and material pulp total volume of 30%~70%, bubble of stability on directly effect material pulp of stability. foaming agent by business out of bubble, if stability strong, long time not burst, so material pulp of stability also must will is good. If foaming agent by business out of bubble, stability is poor, Slurry's stability will be affected

KeyWord:

Address:Room 1508, Building A, New Town Plaza, Shajing Street, Bao'an District, Shenzhen  TelePhone:18719060906  MobilePhone:18719060906  E-mail:891339018@qq.com

Mobile